Welder II Job at EPSILON SYSTEMS, Portsmouth, VA

ZHlhaWdiWW9IZElZREFMNkQ2Y0p5a1RkdlE9PQ==
  • EPSILON SYSTEMS
  • Portsmouth, VA

Job Description

Job Description

Epsilon Systems is seeking a full time Welder II in Portsmouth, VA.

Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.

Responsibilities:
    \n
  • Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.
  • \n
  • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
  • \n
  • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded. Read and understand Epsilon Systems Mission Readiness Group PPE Policy.
  • \n
  • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.
  • \n
  • Lays out material prior to performing machining operations to prevent possible errors.
  • \n
  • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.
  • \n
  • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
  • \n
  • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
  • \n
  • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.
  • \n
  • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
  • \n
  • Reads and understands basic terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.
  • \n
  • Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.
  • \n
  • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.
  • \n
  • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
  • \n
  • Selects proper materials and requirements to perform welding functions.
  • \n
  • Performs work outside of trade if necessary.
  • \n
\n

Qualifications:
    \n
  • High school diploma/equivalent.
  • \n
  • 3 years' experience working under a skilled welder.
  • \n
  • Has knowledge of the trade qualifications and performs as an Welder II.
  • \n
  • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.
  • \n
  • Ability to properly select welding filler material, joint design and proper heat ranges as directed by Technical Work Documents.
  • \n
  • Ability to use grinding and cutting tools.
  • \n
  • Communicates effectively, work independently or in a group.
  • \n
  • Ability to do basic math, i.e. add, subtract, divide and multiply.
  • \n
  • Ability to read, write, speak, and comprehend English.
  • \n
  • Ability to read and understand basic terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.
  • \n
  • Ability to perform the following hot work operations: Plasma Arc Cutting, Carbon Arc Cutting, Oxygen/Acetylene Cutting, SMAW.
  • \n
  • Must be qualified in a minimum of 5 welding/brazing processes.
  • \n
  • Ability to obtain and maintain access to US Navy ships and government/private facilities.
  • \n
  • Must be able to travel
  • \n
\n
ADA Notations:
    \n
  • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
  • \n
  • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
  • \n
  • Able to lift, carry and move objects up to 50 lbs. in weight.
  • \n
  • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
  • \n
  • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
  • \n
  • Able to perceive and distinguish normal range of colors.
  • \n
  • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
  • \n
\n

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Tags

Full time, Local area,

Similar Jobs

Flowserve Corporation

CNC Machinist Job at Flowserve Corporation

 ...36-hour notice) Location: Raleigh, NC. Benefits Starting From Day 1: Medical, Dental & Vision Insurance (including FSA and HSA options) Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance Short and Long Term Disability... 

Logan Bus Company

School Van Driver Job at Logan Bus Company

 ...companies in the Metropolitan Area. We are dedicated to recruiting and retaining the best-trained drivers and escorts in the industry. ****PERMIT HOLDERS ARE WELCOME TO APPLY TO OUR PAID CDL TRAINING AND CERTIFICATION PROGRAM TO HELP YOU PASS THE ROAD TEST******We will... 

CHRISTUS Health

Nurse Extern PCU / Per Diem Job at CHRISTUS Health

 ...Job Description Description POSITION SUMMARY: The Nurse Extern will apply the knowledge and skills acquired in their nursing program in order to provide direct patient care with compassion, excellence and efficiency. The Nurse Extern works under the guidance of... 

Maxion Research

Work at Home (Remote) Data Entry Position Job at Maxion Research

 ...Join Our Part-Time Research Studies Today! Are you eager to earn extra income from the comfort of your home? We are looking for motivated individuals to participate in paid research...  ...Choose Us? You have the flexibility to work either from home or in-person, with the option... 

J & J Worldwide Services

Painter Job at J & J Worldwide Services

 ...May mix colors, oils and other paint ingredients to obtain proper color or consistency. In general, the work of the maintenance painter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience....